1. PPS Overview :
The system is a small AC & DC Power Supply System designed for
the Villages, Districts, Health Centers,
farmers, herdsmen, outdoor camping, tourism, military, etc. It’s
easy to operate and convenient to carry.
It can power most appliances used in the home, office, shed or
workplace; such as TV’s, stereos, games,
lights, fans, laptops, phones, and power tools. In our product,
solar controller, inverter and battery all are
put in one case.
2 . Charging the PPS :
2.1 How to Charge the Product from the Sun .
There are 2 ways to charge the product by sunlight
2.1.1. Open Solarstock optional foldable solar panel (not included
in the PPS unit) and put it under directly
sunlight, and connect the solar panel connector to the connector of
solar input and lock tightly. Then it
will charge PPS (the battery capacity display is going up). Make
sure the solar panel can get as much
sunlight as possible;
2.1.2. Use your own extra solar panel (Max.150W 18V) to connect
with the solar input connector and put
the solar panel under directly sunlight, then it will charge PPS.
Please be cautious about the solar input
hole negative and positive pole.
When the light shows the battery is 100% full (5 power indicator
lights are all blue) , please take the solar
panel away from sunlight to protect the battery.
When charging the product, the master On/Off Switch should be turn
2.2 How to Charge the Product from Utility Grid
There are 3 steps to charge the product by utility grid :
Step1: Make sure the master On/Off Switch is turning off .
Step 2: Connect the AC adaptor with the AC adaptor Input and lock
Step3: Connect adaptor plug with utility grid .
Please remove the charging cable when the battery is 100% full.
Please do not use extra adaptor
to charge the product.
2.3 How to Charge the Product by Mobiles :
There are 3 steps to charge the product by automobile :
Step1: Make sure the master On/Off Switch is turning off.
Step2: Connect one side of the car charging cable with the
13.5V~18V DC INPUT connector.
Step3: Connect another side with car socket and start the car, and
then it is charging.
Remove the charging cable after the battery is 100% full.
Portable Solar Power System Parameter :
|Battery||Polymer lithium battery 12V 50AH|
|Car charging||Voltage: 12V-20V Current: 5A|
|Solar charging||Voltage: 18V Current: 10A|
|AC charging||Voltage: 13V Current: 6A|
|AC output||Maximum continuous output power: 400W|
|Output voltage: AC110-240V|
|Output frequency: 50HZ|
|Output waveform:pure sine wave|
|DC12V output||Output voltage:DC12V|
|Max output current: 8A|
|USB DC5V output||Output voltage:DC5V|
|Max output current: 3A|
|Jump starter||12V battery car engine start|
|Protections||Over current protection|
|Over voltage protection|
|Over load protection|
|Over temperature protection|
|Under voltage protection|
|Short circuit protection|
|Size||15.16 * 11 * 5.91 Inch|